Campbell scientific crbasic manual
CAMPBELL SCIENTIFIC CRBASIC MANUAL >> READ ONLINE
Two Campbell Scientific software applications, Short Cut and CRBASIC Editor, create CR200(X) programs. • Short Cut creates a datalogger program and wiring diagram in four easy steps. It supports most sensors sold by Campbell Scientific and is recommended for creating simple programs to measure sensors and store data. CRBasic, the CR800's full programming language, supports simple or complex programming and many onboard data reduction processes. Documents Product Brochures CR800-series Specifications Manuals CR800 and CR850 Measurement and Control Systems Technical Papers Benefits of Input Reversal and Excitation Reversal for Voltage Measurements The CR5000's operating system includes measurement, processing, and output instructions for programming the data logger. The programming language, CRBasic, uses a BASIC-like syntax. Measurement instructions specific to bridge configurations, voltage outputs, thermocouples, and pulse/frequency signals are included. OPERATOR'S MANUAL CR1000 Measurement and Control System Revision: 5/05 Campbell Scientific, Inc. Warranty and Assistance The CR1000 MEASUREMENT AND CONTROL SYSTEM is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under normal use and service for thirty-six (36) months from CRBASIC - Native To obtain a Returned Materials Authorization (RMA), contact CAMPBELL SCIENTIFIC, INC., phone (435) 227-2342. After an applications engineer determines the nature of the problem, an RMA number will be issued. Please write this number clearly on the outside of the shipping container. Campbell Scientific's shipping address is: The CRBasic Editor is a programming tool for the CR200X-series, CR5000, CR1000, CR3000, CR800, CR850, and CR9000X-series dataloggers. It is intended for use by the experienced datalogger programmer who needs more flexibility than what is found in Short Cut for Windows ( SCWin ). The CRBasic Editor is a programming environment that provides Knowledge of CRBasic is not required to use Short Cut., check wiring against the generated wiring diagram. If written in CRBasic Editor The CRBasic programming editor; stand-alone software and also included with LoggerNet, PC400, and RTDAQ software., check wiring against each measurement and control instruction. Loose connection points Look for the Example link at the top of each instruction topic. The CRBasic Help Tutorial demonstrates how to access this and other online CRBasic Editor Help files. Also, many programming examples can be found in the data logger and sensor manuals that are available on the Campbell Scientific website. Detailed Description. The CR1000 consists of a measurement and control module and a wiring panel. This data logger uses an external keyboard/display and power supply. Low power consumption allows the CR1000 to operate for extended time periods on a battery recharged with a solar panel—eliminating the need for AC power. Campbell scientific crbasic manual Send a request Send a request Request a question The CRBASIC editor is a feature-rich program editor that supports all the instructions and functions contained in the Data Logger operating system. It is intended to be used by a Data Logger Expert Programmer that needs greater flexibility than in the short-cut Campbell Scientific proprietary software is required to program, configure, and communicate with the CR1000X datalogger. Use the CPISpeed() instruction in your CRBasic program to adjust the CPI bus bandwidth to meet the following maximum combined (total) Ethernet cable lengths: 1000 kB/s for maximum combined Ethernet cable lengths of 15.2 m Campbell Scientific proprietary software is required to program, configure, and communicate with the CR1000X datalogger. Use the CPISpeed() instruction in your CRBasic program to adjust the CPI bus bandwidth to meet the following maximum combined (total) Ethernet cable lengths: 1000 kB/s for maximum combined Ethernet cable lengths of 15.2 m PC400 v.4.7 (150 MB) 23-03-2021. PC400 is Campbell Scientific's free entry-level data logger support software. This versatile software supports a variety of telecommunication options, manual data collection, and data display. PC400 includes an easy-to-use program generator (Short Cut), as well as full-featured program editors (CRBasic, Edlog). The CR1000 Measurement and Control Datalogger is warranted for three (3) years subject to this limited warranty: "PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. ("Campbell") to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless otherwise specified in the Housed in a portable, self-contained package, the CR3000 Micrologger ® consists of measurement and control electronics, communication ports, 16-character keyboard, display, power supply, and carrying handle. The integrated display shows 8 lines x 21 characters (64 x 128 pixels). The CR3000 has a choice of three power-supply base options (alkaline, rechargeable, or no battery). This manual provides information only for CRBasic data loggers. For retired Edlog data logger support, access a retired manual at campbellsci.com/old-manuals 2. Precautions • READ AND UNDERSTAND the Safety section at the front of this manual. • Warning: Failure to protect the sensor from condensation may result in permanent damage.
580, 772, 606, 303, 875.
0コメント